Bidet Installation Cost: Seats, Attachments & Full Fixtures
A bidet seat or washlet on your existing toilet installs for $150 – $400, and a handheld sprayer for $100 – $250. A standalone bidet fixture is the big one at $800 – $2,500 installed, because it needs its own rough-in. The variable on seats is whether an outlet is already nearby. Here is the breakdown.
Talk through this project
Describe the job, get matched with a local licensed pro on the line.
(855) 000-0000New installs, replacements & repairs · No obligation
| Type | Installed range | What drives it |
|---|---|---|
| Handheld sprayer (bidet attachment) | $100 – $250 | Tees off the toilet supply, no power needed |
| Bidet seat / washlet (non-electric) | $150 – $350 | Replaces the toilet seat, cold water only |
| Bidet seat / washlet (electric) | $150 – $400 | Needs a GFCI outlet within reach |
| Standalone bidet fixture | $800 – $2,500 | Own supply, drain and floor mounting: rough-in money |
| Item | Range | When it applies |
|---|---|---|
| New GFCI outlet near the toilet | $150 – $350 | Electric seats with no nearby receptacle |
| Hot water line to the seat | $100 – $300 | Tying warm water to a non-heated seat |
| New supply tee and shutoff | $40 – $150 | Cold supply split to feed the bidet |
| Standalone fixture rough-in | $500 – $1,500 | New drain, vent and supply for a separate bidet |
Want a real number instead of a range?
Calls are answered around the clock and routed to a licensed plumbing pro serving your area.
Call & describe the job
Tell us what you need: a new install, a replacement, or something that started leaking.
Get matched on the line
You are connected with a local licensed plumbing pro who serves your area.
Compare your numbers
Use the ranges on this page to sanity-check the quote before you commit.
Seats and sprayers: the affordable path
Most people who want a bidet add one to the toilet they already have. A handheld sprayer tees off the toilet supply line and mounts beside the bowl: $100 – $250 installed, no electrical work, the simplest option. A non-electric bidet seat replaces your toilet seat and runs cold water from the same supply tee: $150 – $350.
An electric seat, a washlet, adds heated water, a warm-air dryer and a heated seat, and that is where the variable shows up. The seat installs in the same way, but it needs power. If a GFCI outlet already sits near the toilet, the job stays at $150 – $400. If not, adding one is the real cost driver, covered below.
The outlet is the variable on electric seats
A heated washlet needs a grounded, GFCI-protected outlet within reach of its cord, and bathrooms built before the fixture was on anyone's mind often have no receptacle near the toilet. Adding one means running a circuit and setting a GFCI outlet, which is electrical work: $150 – $350 depending on how far the nearest power source sits and whether the wall is open. The supply-tee side of the job is comparable to a bathroom faucet install in scope.
This is why two identical washlets can land at very different totals. The seat is the same; one home has an outlet behind the toilet and one does not. When you price a heated seat, check the wall behind your toilet first. If there is no outlet, factor the GFCI add into your budget before you fall for the brochure number.
Cold vs heated water lines
The simplest seats and sprayers run cold water only, tapped straight off the toilet supply. That keeps the install cheap and the parts list short. For comfort, many seats heat the water electrically inside the unit, which is part of why the electric models cost more and need the outlet.
A third option ties a warm water line from a nearby hot supply to the seat, giving instant warm water without the seat heating it. That tie-in adds $100 – $300 because the plumber runs a hot line and a tee to the bidet connection. On a standalone fixture, hot and cold are both roughed in from the start, so warm water is built into the install rather than added on.
The standalone fixture is rough-in money
A separate, floor-mounted bidet fixture, the kind that sits beside the toilet, is a different category at $800 – $2,500 installed. It needs its own hot and cold supply, its own drain tied into the waste line, and a vent, all roughed into the floor and wall. In a bathroom that was never plumbed for one, most of the cost is that rough-in ($500 – $1,500), not the fixture.
That makes a standalone bidet a remodel decision, ideally timed with other bathroom work while walls or floors are open. If you are weighing it against simply replacing the toilet with a bidet-ready model, our toilet installation cost page covers that route. For most homes, a washlet delivers the same daily function for a fraction of the rough-in cost.
What the visit looks like
A sprayer or non-electric seat is a quick same-day job: the plumber shuts the supply, adds a tee and a shutoff, mounts the unit, and tests for leaks, usually under an hour. An electric seat with an outlet already present is nearly as fast. The job stretches when a GFCI outlet has to be added, which may bring an electrician.
A standalone fixture is scheduled like any rough-in: supply, drain and vent first, then the fixture set and connected, with a written price up front. If the install involves pulling and resetting the toilet, the wax ring and flange get inspected while the bowl is up. Expect the plumber to confirm what is behind the wall before quoting an electric seat, since the outlet question decides whether you are at $300 or $600 on an otherwise identical install.
Ready to get it handled?
One call, no obligation. Describe the job and compare the quote against the ranges above.